HOME | ABOUT US | CERTIFICATIONS | CATALOGUE | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 

Catalogue

Products

Product Flyers

Aztec News

Who's Who

Green

Install Videos
 

35 Year Master Flash® “NEW ICC LISTED FLASHING”

IF YOUR FLASHING DOESN’T HAVE A 35 YEAR WARRANTY,
NEITHER DOES YOUR ROOF!

  • AVAILABLE IN 9 SIZES
  • MADE OF EPDM, THIS FLASHING IS DESIGNED FOR MAXIMUM RESISTANCE TO ALL WEATHER CONDITIONS.
  • THE BASE IS DESIGNED TO FIT VIRTUALLY ALL PANEL CONFIGURATIONS AND ROOF PITCHES REGARDLESS
    OF PIPE LOCATION.
  • ON SITE CUSTOMIZATION.
  • OZONE AND UV PROTECTED.
  • DESIGNED FOR 1/4” TO 13” DIAMETER PIPES.
  • PIPE DIAMETERS CAN BE SEEN CLEARLY FOR PROPER PIPE FITTING.
  • FLEXIBILITY ABSORBS VIBRATION AND PIPE MOVEMENT.


Aztec Washer's ICC-ES is the United States’ leading source of technical information on building products and building technology for code compliance. ICC-ES performs technical evaluations of building products, components, methods and materials. The evaluation process culminates with the issuance of reports on compliance with the major U.S. building codes, which are available at www.icc-es.org.

ICC-ES is a subsidiary of the International Code Council, a membership association dedicated to building safety and fire prevention that develops the codes used to construct residential and commercial buildings, including homes and schools. Most U.S. cities, counties and states that adopt codes choose the International Codes developed by the International Code Council.
Available in 9 Sizes
EPDM 500
ADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to intermittent • +135ºC (+275ºF)
continuous • +100ºC (+212ºF)
LOW TEMPERATURE RESISTANCE tested to… • +50ºC (-65ºF)
TENSILE SET maximum… 10MPa  (1450psi)
COMPRESSION SET maximum… 25%
Complete specification data and testing methods are availiable upon request.
 
Sizing Chart

Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.
  Pipe Size Part Number Flashing Details  
Mini 3 - 19mm MFICCMiniB A-Top opening diameter  Closed
1/8”–  3/4”   B-Cut to suit pipe size    3-19mm (1/8” – 3/4”)
  C-Base dimensions 57mm  (2 - 1/4”)
 
#1 6 - 70mm MFICC1B A-Top opening diameter  Closed
1/4”- 2-3/4”   B-Cut to suit pipe size    6 - 70mm (1/4” – 2-3/4” ) 
  C-Base dimensions 114mm (4-1/2”)
 
#2 22 - 101mm MFICC2B A-Top opening diameter 22mm (7/8”)
7/8”- 4”   B-Cut to suit pipe size   22 - 101mm (7/8” - 4”)
  C-Base dimensions 152mm (6”)
 
#3 6 - 146mm MFICC3B A-Top opening diameter Closed
1/4” - 5-3/4”   B-Cut to suit pipe size   6 - 146mm (1/4” – 5-3/4”) 
  C-Base dimensions 203mm (8”)
 
#4 70 - 177mm MFICC4B A-Top opening diameter 70mm (2-3/4”)
2-3/4” - 7”   B-Cut to suit pipe size   70 - 177mm (2-3/4”– 7”)
  C-Base dimensions 254mm (10”)
 
#5 101 - 209mm MFICC5B A-Top opening diameter 101mm (4”)
4” - 8-14”   B-Cut to suit pipe size   101 - 209mm (4” – 8-1/4”)
  C-Base dimensions 279mm (11”)
         
#6 121 - 254mm MFICC6B A-Top opening diameter  121mm (4-3/4”)
4-3/4” - 10”   B-Cut to suit pipe size    121 - 254mm (4-3/4” – 10”)
  C-Base dimensions 304mm (12”)
         
#7 140 - 292mm MFICC7B A-Top opening diameter 140mm (5-1/2”)
5-1/2” - 11-1/2”   B-Cut to suit pipe size   140 - 292mm (5-1/2” – 11-1/2”)
  C-Base dimensions 355mm (14”)
 
#8 171 - 343mm MFICC8B A-Top opening diameter 171mm (6-3/4”)
6-3/4” - 13-1/2”   B-Cut to suit pipe size   171 - 343mm (6-3/4” – 13-1/2”) 
  C-Base dimensions 431mm (17” )
         
#9 241 - 520mm MFICC9B A-Top opening diameter 241mm (9-1/2”)
9-1/2” - 20-1/2”   B-Cut to suit pipe size   241 - 520mm (9-1/2” – 20-1/2”)
  C-Base dimensions 635mm (25”)
 
MAXI 305 - 724mm MFICCMaxiB A-Top opening diameter 304mm (12”)
12” - 28-1/2”   B-Cut to suit pipe size   304 - 724mm (12” - 28-1/2”) 
  C-Base dimensions 863mm (34”)
 
   
 
   
 
 
 
Phone: 03 9801 1000 | Fax: 03 9801 1055

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009 Aztec Washer Company, Inc. | Site Map | Privacy Statement
 
  Internet Marketing and Lead Generation