Solar Master Flash Pipe Flashings from Aztec Washer

Master Flash® Solar Flash

SOLAR MASTER FLASH®

WEATHER PROTECTION
Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZING
With a pre-cut holes for copper pipe sizes 3/4" to 1" inch allowing minimal on-site preperation and assembly. A "C-12 ASTM additional requirement was added to assure conformance to the most stringent ozone/weathering specifications available.

BASE FLEXIBILITY
The base is designed to form a seal on most roof profiles and pitches regardless of pipe location.

The pitch canal allows for maximum flexibility, easily accommodating up to a 60 degree pitch without affecting the performance.

TWO COMPOUNDS

Availiable in two compounds to handle virtually all job applications

		EPDM 500	SILICONE

ADVANCED OZONE RESISTANCE tested to...		70 hour @ 500 pphm	70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

tested to	intermittent	• +135ºC (+275ºF)	• +260ºC (+55ºF)
	continuous	• +100ºC (+212ºF)	• +225ºC (+437ºF)

LOW TEMPERATURE RESISTANCE tested to…		• -50ºC (-65ºF)	• -74ºC (-100ºF)

TENSILE SET maximum…		10MPa (1450psi)	5 Mpa (700 psi)
COMPRESSION SET maximum…		25%	50%


Complete specification data and testing methods are availiable upon request

Sizing Chart
	Pipe Size	Part Number	Flashing Details
SOLAR FLASH	19 - 25mm	BLACK - MFSFB	A-Top opening diameter	15mm (.60")
	(3/4" - 1")	SILICONE - MFSFS	B-Cut to suit pipe size	63mm (2-1/2”)
			C-Base dimensions	101mm (4”)

Flashing Detail

Phone: 03 9801 1000 | Fax: 03 9801 1055

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009 Aztec Washer Company, Inc. | Site Map | Privacy Statement