FAQs

Below are some common FAQ’s we get around general items, purchasing, warranties, products specifications and more

Master Flash

  1. All EPDM Master Flash pipe flashings will have a high temperature resistance of 135°C intermittently. A silicone red compound is also available and this product has a high resistance of 260°C intermittently.
  1. Master Flash products will flash to a diameter of 1mt.
  1. Yes the Master Flash range of products are available in BHP Colours on request.
  1. Yes, our Master Flash Square Vent Range is available and will suit penetrations from 20mm – 485mm. Also available to suit tiled roofs up to 125mL pipe penetrations.
  1. A good quality roof & gutter silicone sealant should always be used when installing a Master Flash pipe flashing for metal roofs.
  1. The use of a self drilling screw or pop rivet (sealed) is recommended at all times.
  1. All Master Flash products carry a 25 year warranty. We also have a Master Flash ICC Range of products that carry a 35 year warranty.
  1. Most of our products are designed to cater to a roof pitch of 45°. If more is required then our Master Flash Extreme Angle range is designed with a built in 40° pitch and therefore can handle a roof pitch from 35° – 65°.